We taught KUKA KR240 robots to carve carve marble sculptures end to end with autonomous toolpathing and simulation, starting with the Stanford bunny as a test case. Here’s how it goes from 3D model to finished sculpture using voxel representations and geodesic path planning.
Cool work! Could you maybe say a few sentences about where/how specifically this improves on the current state of the art? I was under the impression that whole monasteries in Italy are running fleets of CNC robots to create marble sculptures - is your process easier to set up, does it go further, does the old process need human finishing etc.? Thank you!
Multi-access robotics is NP-hard, and only a closed-loop soft-real-time path correction is feasible. It is usually something pre-baked similar to gcode. =3
The words in the post look LLM generated. For some portion of us, that's offputting.
Aside from that, this stood out:
> our mission is to continue to work with artists and designers to decide on the final desired sculpture, and hand carvers to finalize the surface quality of many of our pieces.
This sounds good on the surface (hah) but it seems like it's only valid until the technology allows that work to be replaced too.
Honestly for CAM you absolutely need deterministic output (Speaking from experience, I built automated CAD to CAM pipelines in the past using Python+Siemens NX). IMO the true innovation is the algorithm that they must have built that turns a target voxel into a 5+-axis machining toopath, but that's good old fashioned algorithms, and also getting to a 100% automated CAM generation. Achieving 95% automation is easy, 100% is very hard
There are a couple of mentions of "machine learning", in the parts about generating the toolpaths and connecting the toolpath segments into a continuous path, but I'm still not sure I'd call it teaching robots
Yeah I was about to say the same thing. just looks like normal CAM to me.
Good efficient CAM is hard to do, and looking at how dense those toolpaths are, I don;t think its thats efficient. It also seems to only use one tool. I assume thats because anything bigger will cause the arm to deviate toomuch.
> I assume thats because anything bigger will cause the arm to deviate toomuch.
I've been around a lot of CNC machines, wood routers, metal cutting, plasma/water-jet/laser cutters, laser welding, etc. The key to accurate motion is rigidity and heavy CNC machine tool frames that push a tool into work are hunks of cast iron or steel structures encased in cast epoxy granite. They ride on box ways or heavy linear bearings. They are MASSIVE.
Those robot arms have the rigidity of a wet paper straw by comparison. IMO, this should be a two step process where traditional machines with big tools hog out the rough shape then the robot arms carve the final details.
I recommended seeking the first clip to 00:30 and play it from there. The perspective is somewhat confusing, but the robotic arm in use (KUKA KR240) is actually huge.
Yep, people think they have timeless taste, but mostly it's a reaction to their environment. If you grew up in a works surrounded by endless over the top ornamentation, clean simple lines look fresh, new and appealing. If you grew up in a world of glass boxes, you're desperate for ornamentation.
Same; it's a fascinating tech exploration, and I enjoyed reading about how it works.
But part of the reason I find carved statues to be impressive and monumental is the technical human feat and the craftsmanship. Looking at them, you can sort of feel the work they must have required.
Mass produced goods aren't inherently bad; but there is something lost in translation for pieces like this, IMO.
Huh, I remember discourse with the CEO (I think) of Monumental on twitter a while ago. There was a frenzy around anti-ai art at the time. If I remember right, he replied to many comments that very skilled human artisans still did the final touches on the sculptures that were cnc carved rough. It really seemed like he was taking that criticism seriously
But now, "... our system turns a 3D model and a block of marble into a finished sculpture, with no human in the loop."
I'm not judging one way or the other. I have 0 skin in this debate. I just find situations like that interesting; like trying to douse a publicity fire while secretly making wildfire
It would be really nice to be able to afford a marble statue. But, really thinking about it I would more than happy with a cast statue, if the casting could have as much detail and crisp edges as marble.
I started looking into modern concretes (for about 5 minutes), and there seems to be a bunch of modern options. I don't know how they compare to marble. I wonder if there is any literature out there giving detail on their properties
But then again, there is an artist who had a bronze sculpture cast in china for crazy cheap. I can't rewatch it now, I think it was under $20k https://www.youtube.com/watch?v=7CtmiWlT6Z4
A tenet of modernism is that you don't hide the structure. And not necessarily for cost reasons. It can extend to: don't paint it. If you don't like the aesthetics of the material, find a better-looking material.
Ornamentation costs money to transport and install. It can require additional support structures. And it adds additional surface area which complicates maintenance and waterproofing.
> I could imagine a future where marble sculptures are seen as trashy, because of their ubiquity.
And we can see such a past too: they used to be totally fugly, with horrible bright colors. It's by chance that color pigmentation went away after centuries and when they were re-discovered, people found them --at long last-- good looking.
And now we've got beautiful white marbles like the one already posted in this thread and like:
The profit chain will be how quickly they can replicate a block from a scan of a real block in need of restoration. I have seen countless documentaries on the restoration of old buildings, with the inevitable interviews with stonemasons about how many hours go into each block. The ability to auto-chisel a replica from a scan of an original would radically reduce the cost of restoring old structures.
Redoing the blocks by hand is the whole point. It is experimental archaeology, on top of preserving (and rediscovering lost) old techniques. Your suggestion is useless, counterproductive (where will we find the subject matter experts in old techniques once you kill their jobs?) and ridiculous ("profit chain"... Do you even know how little money there is in restoration?).
>the inevitable interviews with stonemasons about how many hours go into each block
Yeah, it is a point a pride, not a problem to be solved. And they will put their signature on the blocks they sculpted, like their predecessors and the predecessors before them, and someone in a century or a millenium will notice it. That's a form of eternity the tech bros will never attain.
There are many European restoration project awaiting the availability of stonemasons and/or funding. A cheaper/faster way to replicate blocks would allow restorations to happen that are currently not happening. It might even save some buildings currently considered too expensive to restore.
>>The capital’s heritage buildings — 600 of which are in urgent need of restoration — are kept from disrepair by an ever-shrinking pool of master craftspeople
> Stone carving never disappeared, but rising costs pushed it out of ordinary construction
Why "rising costs" though? Are the carving tools significantly more expensive? Or did we just find a way to do shittier stuff with less expense and we called carving too expensive?
I think estate developers just managed to somehow convince our regulators that copy pasting the same building across the world is unique and modern and we should do it.
For good reason. There are things that work in building layouts and things that don't. Everything looks the same, but the inside that you work with is often very functional. Even in the most work of art buildings, the building itself will fad into the background of all the things you do inside - unless the building is hostile to doing the things you are inside to do.
People like being paid in line with inflation etc, and theres likely a lot less stonemasons around today. It was probably a lot cheaper to get a marble carving made in ye olden days than now
The amount of people that actually know and do that kind of work has probably become very small while the demand might still be there. High demand, low supply -> usually increasing prices. There's generally a big decline in skilled trades and with that the same problem is coming up in other sectors as well.
From wikipedia: "Baumol’s cost disease (or the Baumol effect) is an economic theory explaining why wages and prices in labor-intensive services—like healthcare, education, and the performing arts—rise even when their productivity does not."
Its interesting because take education: the professor, no matter how good he his, is still capped by the student learning rate. Many times these jobs are also kind of based on "spend your day with the kids" at school and get to live with that wage. And we really don't care about "performance".
Stone carving was always expensive. What changed is other parts of building went down and so not stone carving would be a much larger share.
Most of us would live in closer to mud huts than a mansion 1000 years ago. The people who live in mansions still do stone carving if they feel like it, but the rest of us have moved up to much nicer houses. (mansions are much nicer too)
2) This isn't a particularly interesting model to sculpt. The parent model is a scan of a ceramic rabbit, and it doesn't have crisp details like really good marble sculptures do.
I have seen Venus Victrix[0] in person, and the detail in the mattress the figure is lying on is absolutely transfixing. You would swear the marble would softly yield if you put your finger on it. There's a detail rendered around the edge of the mattress that likely represents embroidery and it's unbelievably crisp, even as it follows the folds and creases in the mattress.
If we're going to have robots sculpt marble, that is the standard we should be reaching for. If we're reaching for that, I think we're going to find that modeling the finished product in 3d is going to be a significant fraction of the work of actually carving it in stone. I think we're also going to find that the mastery also lies in the tiny decisions the sculptor makes as they work, informed by how light plays off the material in different directions in real time throughout the day.
Can the process in the article achieve results suitable for mounting at the top of a building and viewing from ground level? Probably, and if not now, certainly with time. Can it sculpt something that will command your attention in reverent, slack-jawed awe for hours? I don't see it happening.
[0] https://en.wikipedia.org/wiki/Venus_Victrix_(Canova) Seriously, this and Bernini's David, also at the Galleria Borghese, are worth the trip to Rome to see. If there were nothing else in Rome worth seeing and the food was terrible, they would justify the pilgrimage on their own.
The rabbit sculpture is a little underwhelming, even given the simplicity of the model. The tool marks are pretty obvious and aren't really used to artistic effect either.
One of my best art moments was the Vatican museum. At one point, there's a garden, but most people instead head past it. I walked into the garden and came across https://en.wikipedia.org/wiki/Laoco%C3%B6n_and_His_Sons with nobody else around and spent ten minutes inspecting it in detail (including around the sides). This is somethiing that was carved 2000 years ago! Absolutely stunning, and much more appreciable in a quiet, relaxed setting.
I fully expect that robots will be able to carve novel masterpieces in 10 years.
> modeling the finished product in 3d is going to be a significant fraction of the work of actually carving it in stone.
Of course. But what is the problem with that?
We have the same situations with many other things. With printers: It takes way more effort to write a book worth printing than the actual effort of putting in the reams of paper into the printer and hitting the print button. Same with 3d printing. People spend days, weeks, months, or years modelling something interesting and then it is relatively easy to get it printed once it is designed.
> Can it sculpt something that will command your attention in reverent, slack-jawed awe for hours? I don't see it happening.
I don’t see why it couldn’t carve a model which evoke those emotions into stone. And i used my words deliberately there. Because i would call the person who made the model the sculptor. I wouldn’t say that the machine sculpted anything.
The machine is a machine. It carves the stone. We can talk about how accurately it does what it does, we can talk about the surface quality it leaves behind. We can even talk about what geometries it can or can’t tackle due to the particular arangement of the arm and the spindle.
If those “datasheet properties” are good enough, then all you need to do is get a good artist who is handy with some modelling software let them play around with it and you will get your “awe inspiring”.
Reminds me of the link to the Carmelites[0] that was on HN a few weeks ago.
But they do it in stone (they don't seem to mention what kind of stone, tho). I think marmble is a different experience, and I wonder what the implications are. Often enough marble requires an experienced master to "read" it. Since it's a natural stone there will be veins, imperfections etc. Sometimes you'll have to work around it and alter your design slightly while carving - which is not possibble if a robot just does its lusterless job.
While I admire this task, and I hope that we will see more carved stones in our buildings and surroundings again, I also hope that we can use technology as our aid, not as the end in itself.
There is a manufacturer in Germany who does exactly this, btw (rough cuts by robot, fine tune by human masters). So there is a lot of prior art out there - I wonder if there was anything new at all.
Came here to post this, but you already have. So I will just add that everyone should visit the link just to see a berobed monk with a tonsured haircut (think Friar Tuck) running desktop CAD and multiaxis CNC.
It was cheaper to spend a trillion dollars on LLM’s and robotics and then “teach” a robot to carve out this first year bunny assignment rather than pay any artists or stonemasons. Historically their work can last for thousands of years and bring beauty to millions yet unborn who will marvel at the magnificence of this creation. But you know this little stone rabbit is cool too. I’m sure it will make a useful doorstop. Now we can have stoneslop!
Not as low-effort as your soulless unoriginal easily predictable single-word drive-by human slop. That's not even good enough to be a prompt. Try harder, or take your banal frustrations out on reddit instead of hacker news. If you can't think of anything better to post, then go carve a rock yourself.
I watched this in a museum in Prague on a big screen, it's incredibly and enjoyably artful. That being said I couldn't help notice the final texture felt off. I suspect the techniques are already improving. I watched it Nov 26 but apparently according to yt it's several years old already. I also don't think this one is AI based at all.
I don't get it. This is what everyone do when they need a giant mockups of things like new model of a cars or boats or giant pharaoh statues, except it's usually done with styrofoam.
Is there some technical novelty to it? The hero image on the company website is an Arc de Triomphe that doesn't seem to be the one in Paris, it is like they are a startup specializing in quickly producing artistic stone decor for projects like the arc?
CNC machining techniques already exist, but hey require extremely manual use of largely drag and drop software like Autodesk's Powermill which can take weeks to months to program a statue. Please see a new section called: "Complex CNC machining already exists. What is actually new?" where we explain this better. We are fully automating the hardest bottleneck of this process which is the manual toolpath programming.
This is fascinating work, thanks for sharing. My first thought about the bunny is that the voxelation process produces crude tools marks that look very much like layer lines in extrusion printing. I imagine a future version of your tooling where the model is annotated with surface vector fields, and other params like courseness, 'wavyness', stroke length, etc. to better describe fur texture. The annotations will guide the tool path on the finished product so the tool marks become features, not glitches.
Extrusion printing is showing some promising work with surface 'ironing' that I imaging will evolve similarly.
I look forward to seeing how this work evolves over time.
Mardi Gras floats have been done this way for years. OK, polystyrene foam, but is there a real difference from marble other than settings (speed, tool changes, precision)?
The Stanford bunny direly needs an upgrade (like the Utah Teapot had several of) that recovers details the original had and thusly exhibits more shape contrast.
It's especially a sub-par choice for the demonstration at hand because the surface texture is too smooth. At the time, digitizing smoothed/skipped/undersampled details.
See a picture of the original[1] and compare to the detail on the marble carving.
Technologically advanced, sure, but still less impressive to me than a human sculpting marble. Two human hands, and a human brain, carving David! Can you imagine! The hours of planning, of work, not to mention the years of experience, the last-minute changes of plan as he discovers a certain vein in the marble...A machine doing an exact replication would not be anywhere near the masterpiece that Michelangelo's is.
Sure but I would still like nicer things in the world, and if the reason we don’t have them is Cost, then I’m happy someone’s working to make gorgeous marble cheaper (even if it’s not the work oh solely human hands)
This. We don't get (or rarely get) works like David because people just don't have the same kind of time they used to - which seems unlikely to resolve, so I'll take pretty much anything that makes public constructions less boring.
That said, the whole air-rights footprint-build issue isn't one of capability so despite the ability to create sophisticated friezes on the cheap, I do wonder how much we'll actually use them...
Sculpting teacher here. Ceramic and oil clay--marble is scary.
On the one hand, there is something special about an artist made sculpture. But on the other, in north america we have almost no cool sculpture around us day to day. So few people can make them and there is seemingly limited demand due to costs
If companies start producing millions of sculptures and selling them at walmart or dollarama in bulk, will they still be cool? Or will we make them in our garages in 2036 with robot arms and ai generated designs informed by amazon ring camera footage of our neighbourhoods?
As an artist, what does your role become? Does anything remains scarce in art? Would love to hear some speculation
>> As an artist, what does your role become?
A prompter like most of the jobs that will transform into promoter jobs. Different skills will become more valuable.
I'm not an artist, so maybe I'm missing the mark, but I feel like the hard part of making art should be learning how to express or project your artistic vision or complex emotion or some other aspect of human experience into physical space. I'm not sure I subscribe to the idea that the difficulty of the medium you choose is necessary. Sometimes it's the point of the work, but I don't think you're getting the most out of the Pietà if your take home is "wow, that must have been difficult" (although that's just my opinion).
We can look at other art forms that are pretty accessible w.r.t. barrier to entry. Most folks learn creative writing as school children and master the fundamentals quite quickly. Sure, there's reams of bad (and good, don't come at me) fanfic at ao3 as well as middling pulp at the gas station, but I don't think that stops great works from appearing or being any less special.
Similarly, we see pretty terrible statues in public places quite frequently (I'm thinking the derpy Ronaldo statue or the Lucille Ball statue in Celeron).
So all that to say, I'm optimistic that if something like this meant statues were easy to make and you can design one in your underwear in a few hours and hit "print", sure the volume of shite statues would explode, but I think that just raises the floor on quality a bit and leaves the ceiling in tact.
The Walmart effect doesn't worry me because we can already have that with prints of the masters and few do it.
Instead, I'm inspired. Could we democratize and evangelize culture this way?
The American city I live in has 300,000 people. Why can't it have a large building that has full replicas of the great works of art? The Mona Lisa, Whistler's Mother (or Falling Rocket), Van Gogh's Sunflowers or self-portraits (with impasto). Marble sculpture replicas of Canovo, Bernini, Rodin. A small, one-stop shop of some of the world's great works, for people who will never see it otherwise.
Even beyond that, this would let people interact with these works in a way no one really has in the past. Have kids make hats for the Roman busts, or paint themselves into Renoir's street scenes.
One of my favorite parts of the V&A in London is getting really up close to the Trajan's Column [1] cast that they have, which you cannot really do with the real place.
I rented a house in Hawaii (outside Hilo) that had two 6 foot horse sculptures by the pool. They were expensive marble, but ugly, and included realistic penises for some reason.
Scarcity due to expense means catering to the taste of those with money, no matter how bad their taste is.
When cameras outcompeted human painters, the humans started doing "modern" non figurative art. Cameras can't compete with Dali's imagination.
This had some success, but mostly painters had to find other jobs. Some became photographers.
Our appreciation of art is usually a mix of liking the art itself and admiring the artist. Machines can make technically better art, but I think humans will always be more admired.
If marble sculptures were of functional utility I guess this would be cool.
If the whole purpose of a marble sculpture is to marvel at the beauty a human created -- not being the type to surround himself with marble, I am only guessing here -- then I don't see the point of this. Except it was probably a fun project.
While I understand the economic benefits of automation, I think what they are trying to do is cold and sterile. Being monumental without a human soul? I don't know what the point of it even is.
The positive impact of architectural ornamentation on our urban environment cannot be understated. Think what Gaudi could have done with this technology. Sure it's a robot but the results could be more human than anything we're building today.
The details are just jaw dropping. Are the details carved by human hands or by the robot itself??
As an amateur artist and as a robotics techie, I'm both fascinated -- and alarmed -- by the use of AI in the process. Part of the artistic process has always been the "human struggle", ranging from inspiration to the actual hard work of putting pencil / paint / chisel to work. Often, but not always, that has determined our value of the work, whether it is the Sistine Chapel or the Last Supper, or indeed Shakespeare's plays. With AI tools short-circuiting the necessary "burden" of the artistic process, whether generating the next token, or next pixel, the chunk of stone, or the next note in a musical score, our value of that resulting work changes (and has changed). Sometimes dramatically. Who'd prefer the n-th copy of Warhol's "Campbell Soup" or the Marilyn posters if they had the opportunity for the original (painting?)?? Which would you rather hang in your living room??
For sculptures, the work is a physical entity, in your face, sometimes architecturally, sometimes not. Even then, does the provenance of the sculpture actually diminish its value?? I'm not so sure. I do welcome these robotically made sculptures, but I do wonder if/when there are too many of them, all around. Kinda like AI-slop articles on the webz.
I dont have any solid answers... just some feelings (pls. dont call 'em vibes)
Regardless, at least for now, I do love these, and I'm just fascinated that this tech is being used to create more art. We all could use more of it in our lives.
[To the OP: I have a few more ideas on what else we could create. Happy to chat.]
[OP] ewiesler | a day ago
moeffju | 8 hours ago
le-mark | 8 hours ago
What does this mean exactly? Is the robot not being fed gcode?
Joel_Mckay | 5 hours ago
GrinningFool | 7 hours ago
Aside from that, this stood out:
> our mission is to continue to work with artists and designers to decide on the final desired sculpture, and hand carvers to finalize the surface quality of many of our pieces.
This sounds good on the surface (hah) but it seems like it's only valid until the technology allows that work to be replaced too.
voidUpdate | 8 hours ago
GrinningFool | 8 hours ago
suddenlybananas | 6 hours ago
GrinningFool | an hour ago
amelius | 7 hours ago
Overdrivr | 6 hours ago
voidUpdate | 6 hours ago
ourmandave | 5 hours ago
indoordin0saur | 4 hours ago
KaiserPro | 3 hours ago
Good efficient CAM is hard to do, and looking at how dense those toolpaths are, I don;t think its thats efficient. It also seems to only use one tool. I assume thats because anything bigger will cause the arm to deviate toomuch.
MisterTea | 3 hours ago
I've been around a lot of CNC machines, wood routers, metal cutting, plasma/water-jet/laser cutters, laser welding, etc. The key to accurate motion is rigidity and heavy CNC machine tool frames that push a tool into work are hunks of cast iron or steel structures encased in cast epoxy granite. They ride on box ways or heavy linear bearings. They are MASSIVE.
Those robot arms have the rigidity of a wet paper straw by comparison. IMO, this should be a two step process where traditional machines with big tools hog out the rough shape then the robot arms carve the final details.
cloudbonsai | 8 hours ago
pwmglenn | 8 hours ago
LtWorf | 7 hours ago
martythemaniak | 7 hours ago
jackp96 | 7 hours ago
But part of the reason I find carved statues to be impressive and monumental is the technical human feat and the craftsmanship. Looking at them, you can sort of feel the work they must have required.
Mass produced goods aren't inherently bad; but there is something lost in translation for pieces like this, IMO.
fusslo | 7 hours ago
But now, "... our system turns a 3D model and a block of marble into a finished sculpture, with no human in the loop."
I'm not judging one way or the other. I have 0 skin in this debate. I just find situations like that interesting; like trying to douse a publicity fire while secretly making wildfire
suddenlybananas | 5 hours ago
There still is. Most people are extremely hostile to AI art. (Albeit I see this case as more like mass-production than AI art per se).
fusslo | 4 hours ago
I started looking into modern concretes (for about 5 minutes), and there seems to be a bunch of modern options. I don't know how they compare to marble. I wonder if there is any literature out there giving detail on their properties
But then again, there is an artist who had a bronze sculpture cast in china for crazy cheap. I can't rewatch it now, I think it was under $20k https://www.youtube.com/watch?v=7CtmiWlT6Z4
deadbabe | 7 hours ago
amelius | 7 hours ago
olalonde | 7 hours ago
BeFlatXIII | 6 hours ago
suddenlybananas | 6 hours ago
badlibrarian | 5 hours ago
Ornamentation costs money to transport and install. It can require additional support structures. And it adds additional surface area which complicates maintenance and waterproofing.
TacticalCoder | 3 hours ago
And we can see such a past too: they used to be totally fugly, with horrible bright colors. It's by chance that color pigmentation went away after centuries and when they were re-discovered, people found them --at long last-- good looking.
And now we've got beautiful white marbles like the one already posted in this thread and like:
https://en.wikipedia.org/wiki/Psyche_Revived_by_Cupid%27s_Ki... (this one is my favorite of them all)
https://en.wikipedia.org/wiki/The_Kiss_(Rodin_sculpture)
https://en.wikipedia.org/wiki/The_Greek_Slave
https://en.wikipedia.org/wiki/The_Veiled_Virgin
and so many others.
As opposed to the fugly "I'm-a-five-years-old-and-I-puke-colors" colored marbles of old.
We evolve. Music, too, got way better with Mozart, Bach, Beethoven, etc. compared to the music whistled on the off-tune flutes or yore.
sandworm101 | 7 hours ago
Arodex | 7 hours ago
>the inevitable interviews with stonemasons about how many hours go into each block
Yeah, it is a point a pride, not a problem to be solved. And they will put their signature on the blocks they sculpted, like their predecessors and the predecessors before them, and someone in a century or a millenium will notice it. That's a form of eternity the tech bros will never attain.
Whitespace | 7 hours ago
I agree. I also think that only 0.1% of existing marble will be redone by hand. The rest will either turn to dust or be replaced by machines.
sandworm101 | 5 hours ago
https://www.thetimes.com/uk/london/article/shortage-craftsme...
>>The capital’s heritage buildings — 600 of which are in urgent need of restoration — are kept from disrepair by an ever-shrinking pool of master craftspeople
https://www.heraldscotland.com/news/23299045.shortage-stonem...
curtisblaine | 7 hours ago
Why "rising costs" though? Are the carving tools significantly more expensive? Or did we just find a way to do shittier stuff with less expense and we called carving too expensive?
LtWorf | 7 hours ago
bluGill | 6 hours ago
LtWorf | 8 minutes ago
voidUpdate | 7 hours ago
gauntr | 7 hours ago
sokka_h2otribe | 6 hours ago
readmeonce | 3 hours ago
bluGill | 6 hours ago
Most of us would live in closer to mud huts than a mansion 1000 years ago. The people who live in mansions still do stone carving if they feel like it, but the rest of us have moved up to much nicer houses. (mansions are much nicer too)
iamacyborg | 6 hours ago
https://worksinprogress.co/issue/the-beauty-of-concrete/
mauvehaus | 7 hours ago
1) A great podcast about why we're bad at statues in the US:
https://slate.com/podcasts/decoder-ring/2026/07/how-taste-po...
2) This isn't a particularly interesting model to sculpt. The parent model is a scan of a ceramic rabbit, and it doesn't have crisp details like really good marble sculptures do.
I have seen Venus Victrix[0] in person, and the detail in the mattress the figure is lying on is absolutely transfixing. You would swear the marble would softly yield if you put your finger on it. There's a detail rendered around the edge of the mattress that likely represents embroidery and it's unbelievably crisp, even as it follows the folds and creases in the mattress.
If we're going to have robots sculpt marble, that is the standard we should be reaching for. If we're reaching for that, I think we're going to find that modeling the finished product in 3d is going to be a significant fraction of the work of actually carving it in stone. I think we're also going to find that the mastery also lies in the tiny decisions the sculptor makes as they work, informed by how light plays off the material in different directions in real time throughout the day.
Can the process in the article achieve results suitable for mounting at the top of a building and viewing from ground level? Probably, and if not now, certainly with time. Can it sculpt something that will command your attention in reverent, slack-jawed awe for hours? I don't see it happening.
[0] https://en.wikipedia.org/wiki/Venus_Victrix_(Canova) Seriously, this and Bernini's David, also at the Galleria Borghese, are worth the trip to Rome to see. If there were nothing else in Rome worth seeing and the food was terrible, they would justify the pilgrimage on their own.
mattkrause | 5 hours ago
The rabbit sculpture is a little underwhelming, even given the simplicity of the model. The tool marks are pretty obvious and aren't really used to artistic effect either.
stronglikedan | 5 hours ago
rafaelgoncalves | 3 hours ago
https://en.wikipedia.org/wiki/The_Veiled_Virgin
https://en.wikipedia.org/wiki/Veiled_Christ
brettermeier | an hour ago
dekhn | 4 hours ago
I fully expect that robots will be able to carve novel masterpieces in 10 years.
krisoft | 4 hours ago
Of course. But what is the problem with that?
We have the same situations with many other things. With printers: It takes way more effort to write a book worth printing than the actual effort of putting in the reams of paper into the printer and hitting the print button. Same with 3d printing. People spend days, weeks, months, or years modelling something interesting and then it is relatively easy to get it printed once it is designed.
> Can it sculpt something that will command your attention in reverent, slack-jawed awe for hours? I don't see it happening.
I don’t see why it couldn’t carve a model which evoke those emotions into stone. And i used my words deliberately there. Because i would call the person who made the model the sculptor. I wouldn’t say that the machine sculpted anything.
The machine is a machine. It carves the stone. We can talk about how accurately it does what it does, we can talk about the surface quality it leaves behind. We can even talk about what geometries it can or can’t tackle due to the particular arangement of the arm and the spindle.
If those “datasheet properties” are good enough, then all you need to do is get a good artist who is handy with some modelling software let them play around with it and you will get your “awe inspiring”.
runxel | 6 hours ago
But they do it in stone (they don't seem to mention what kind of stone, tho). I think marmble is a different experience, and I wonder what the implications are. Often enough marble requires an experienced master to "read" it. Since it's a natural stone there will be veins, imperfections etc. Sometimes you'll have to work around it and alter your design slightly while carving - which is not possibble if a robot just does its lusterless job.
While I admire this task, and I hope that we will see more carved stones in our buildings and surroundings again, I also hope that we can use technology as our aid, not as the end in itself.
There is a manufacturer in Germany who does exactly this, btw (rough cuts by robot, fine tune by human masters). So there is a lot of prior art out there - I wonder if there was anything new at all.
[0] https://carmelitegothic.com/cnc-stone-carving/
buildsjets | 4 hours ago
caidan | 6 hours ago
The only voice left is Claude’s.
It was cheaper to spend a trillion dollars on LLM’s and robotics and then “teach” a robot to carve out this first year bunny assignment rather than pay any artists or stonemasons. Historically their work can last for thousands of years and bring beauty to millions yet unborn who will marvel at the magnificence of this creation. But you know this little stone rabbit is cool too. I’m sure it will make a useful doorstop. Now we can have stoneslop!
pentakkusu | 6 hours ago
DonHopkins | 3 hours ago
zenapollo | 6 hours ago
https://youtu.be/fVga1ay2DZk
numpad0 | 6 hours ago
Is there some technical novelty to it? The hero image on the company website is an Arc de Triomphe that doesn't seem to be the one in Paris, it is like they are a startup specializing in quickly producing artistic stone decor for projects like the arc?
https://www.youtube.com/watch?v=qJgdijvbJWg
https://www.youtube.com/watch?v=kyHz90gA21s
https://www.youtube.com/watch?v=ztGFtKJCN-M
https://www.youtube.com/watch?v=N0T6Po0TIK0
[OP] ewiesler | 5 hours ago
GLGirty | 3 hours ago
Extrusion printing is showing some promising work with surface 'ironing' that I imaging will evolve similarly.
I look forward to seeing how this work evolves over time.
classified | 6 hours ago
the__alchemist | 6 hours ago
Kaibeezy | 5 hours ago
https://www.fox8live.com/story/31913419/robot-brings-mardi-g...
https://www.youtube.com/watch?v=guIJzGy1hzA
virtualritz | 5 hours ago
It's especially a sub-par choice for the demonstration at hand because the surface texture is too smooth. At the time, digitizing smoothed/skipped/undersampled details.
See a picture of the original[1] and compare to the detail on the marble carving.
[1] https://i-blog.csdnimg.cn/blog_migrate/383571b9f94546ab262f7...
xnx | 5 hours ago
ERROR: ACCESS DENIED
caidan | 4 hours ago
https://faculty.cc.gatech.edu/~turk/bunny/bunny.html
Second image down. Parent is wrong, this definitely should have been updated. Much more detail in the original.
bliteben | 5 hours ago
Guthwine | 5 hours ago
MattDamonSpace | 5 hours ago
onemoresoop | 5 hours ago
pksebben | 5 hours ago
That said, the whole air-rights footprint-build issue isn't one of capability so despite the ability to create sophisticated friezes on the cheap, I do wonder how much we'll actually use them...
barbariangrunge | 5 hours ago
On the one hand, there is something special about an artist made sculpture. But on the other, in north america we have almost no cool sculpture around us day to day. So few people can make them and there is seemingly limited demand due to costs
If companies start producing millions of sculptures and selling them at walmart or dollarama in bulk, will they still be cool? Or will we make them in our garages in 2036 with robot arms and ai generated designs informed by amazon ring camera footage of our neighbourhoods?
As an artist, what does your role become? Does anything remains scarce in art? Would love to hear some speculation
theplumber | 5 hours ago
jszymborski | 5 hours ago
We can look at other art forms that are pretty accessible w.r.t. barrier to entry. Most folks learn creative writing as school children and master the fundamentals quite quickly. Sure, there's reams of bad (and good, don't come at me) fanfic at ao3 as well as middling pulp at the gas station, but I don't think that stops great works from appearing or being any less special.
Similarly, we see pretty terrible statues in public places quite frequently (I'm thinking the derpy Ronaldo statue or the Lucille Ball statue in Celeron).
So all that to say, I'm optimistic that if something like this meant statues were easy to make and you can design one in your underwear in a few hours and hit "print", sure the volume of shite statues would explode, but I think that just raises the floor on quality a bit and leaves the ceiling in tact.
david927 | 5 hours ago
Instead, I'm inspired. Could we democratize and evangelize culture this way?
The American city I live in has 300,000 people. Why can't it have a large building that has full replicas of the great works of art? The Mona Lisa, Whistler's Mother (or Falling Rocket), Van Gogh's Sunflowers or self-portraits (with impasto). Marble sculpture replicas of Canovo, Bernini, Rodin. A small, one-stop shop of some of the world's great works, for people who will never see it otherwise.
cruano | 4 hours ago
One of my favorite parts of the V&A in London is getting really up close to the Trajan's Column [1] cast that they have, which you cannot really do with the real place.
[1] https://en.wikipedia.org/wiki/Trajan's_Column
shermantanktop | 4 hours ago
Scarcity due to expense means catering to the taste of those with money, no matter how bad their taste is.
BurningFrog | 4 hours ago
This had some success, but mostly painters had to find other jobs. Some became photographers.
Our appreciation of art is usually a mix of liking the art itself and admiring the artist. Machines can make technically better art, but I think humans will always be more admired.
bagacrap | 5 hours ago
If the whole purpose of a marble sculpture is to marvel at the beauty a human created -- not being the type to surround himself with marble, I am only guessing here -- then I don't see the point of this. Except it was probably a fun project.
superxpro12 | 4 hours ago
sinuhe69 | 4 hours ago
BeratnasGas | 4 hours ago
malshe | 3 hours ago
jgbuddy | 2 hours ago
frnz | 2 hours ago
aanet | an hour ago
I'm both awestruck at the at the final sculptures, as much as I am fascinated by the (hi-tech) robotic carving aspects of it.
The Feynman statue looks awesome (https://www.monumentallabs.co/work?project=Richard+Feynman ) as does Athena (https://www.monumentallabs.co/work?project=Athena+Promachos )
The details are just jaw dropping. Are the details carved by human hands or by the robot itself??
As an amateur artist and as a robotics techie, I'm both fascinated -- and alarmed -- by the use of AI in the process. Part of the artistic process has always been the "human struggle", ranging from inspiration to the actual hard work of putting pencil / paint / chisel to work. Often, but not always, that has determined our value of the work, whether it is the Sistine Chapel or the Last Supper, or indeed Shakespeare's plays. With AI tools short-circuiting the necessary "burden" of the artistic process, whether generating the next token, or next pixel, the chunk of stone, or the next note in a musical score, our value of that resulting work changes (and has changed). Sometimes dramatically. Who'd prefer the n-th copy of Warhol's "Campbell Soup" or the Marilyn posters if they had the opportunity for the original (painting?)?? Which would you rather hang in your living room??
For sculptures, the work is a physical entity, in your face, sometimes architecturally, sometimes not. Even then, does the provenance of the sculpture actually diminish its value?? I'm not so sure. I do welcome these robotically made sculptures, but I do wonder if/when there are too many of them, all around. Kinda like AI-slop articles on the webz.
I dont have any solid answers... just some feelings (pls. dont call 'em vibes)
Regardless, at least for now, I do love these, and I'm just fascinated that this tech is being used to create more art. We all could use more of it in our lives.
[To the OP: I have a few more ideas on what else we could create. Happy to chat.]