They filed a suit, henceforth making a claim of an issue...... They haven't "proved" anything other then they have lawyers on staff that can file some paperwork until the suit is settled in court...
Sisvel allows you to pay them if you believe their claims, they haven't actually taken anyone not paying to court yet to prove that. The only court cases for VP9/AV1 from Sisvel so far have been their patents being found invalid/irrelevant.
Dolby is somewhat more interesting in that rather than scare tactics, media hype, and attempting to form a pool about it they are actually taking a patent assertion claim to court.
That crowd are just deeply concerned one of their lucrative revenue streams is disappearing.
So they seem to be attempting to pull a fast one and use unproven claims to try and convert their competitor into a replacement revenue source.
It'll probably be a case of whoever has the best lawyers + contacts + persistence wins.
But it'll be interesting if discovery shows evidence they know they don't have a case and are trying it anyway. "Piercing the corporate veil" can theoretically be a consequence of that AFAIK.
Every single AV2 news here in the last week has seen exactly the same question.
Either go back read the answers there first, or I will assume you are part of a FUD campaign (yes, I know HN guidelines, but again every single AV2 news in the last week has seen the same rhetorical "questions" as top "comments").
dav1d is the av1 decoder and it’s an insane feat of engineering. Written in assembly, it even eschews the normal c calling convention to get even better performance.
The normal C calling convention is really only for cross-binary calls (e.g. between shared libraries). If you're not doing that you can ignore it; it's not a weird thing to do. It would be odd to strictly follow it in assembly and I assume compilers don't either.
I understood it as compression is 25% better : a quality of 10mbps in av1 can be achieved with 8mbps in Av2.
But, it needs 5 times more compute power for this 25% gain.
'AV2 decoding is roughly five times more complex than AV1 decoding. In practice, that means software running on today’s hardware will struggle to decode AV2 in real time without careful, architecture-specific optimization'
AV1 software decoding is already very intensive so AV2 decoding benchmarks are the next thing that would be really interesting (or mortifying) to see.
> AV1 software decoding is already very intensive so AV2 decoding benchmarks are the next thing that would be really interesting (or mortifying) to see.
Hardly niche. My laptop isn't new and it has hardware AV1 decoding and encoding. My 10 year old iPhone 7 can play 1080p AV1 video in software for over 200 minutes with VLC. The iPhone 7 was released in 2016, a year and a half before AV1. The dav1d decoder is mighty.
Supported is different from doing it well though. You do notice the performance hit even on TVs that playback YouTube videos on AV1.
Even on 1080p videos running on AV1 on 1x, the TV system bogs down and any kind of interaction has a variable 1-3s lag. On some TVs if you do 1.25x the TV automatically "downgrades" the resolution to 480p to avoid dropping frames.
I wish there was an option to still use VP9 / H.264 on those systems (even limited to 1080p).
Yeah I could imagine the AV1 codec sticking around for a very long while, even as a fallback for AV2. There's still hundreds of millions of people out there using old/cheap devices (especially in developing countries) where that battery drain from software decoding is a big problem, so AV2 would be nonviable.
Some of the early use of VP9 and AV1 was Netflix serving video to people in developing countries. Their metered bandwidth was more of a bottleneck than the CPU playback.
Intel's Arc dGPUs were really compelling for dedicated AV1 encode and decode, especially the small form factor of some cards. You could even fit it as a secondary card in a PC dedicated to recording and encode workflows for OBS.
Hope we get a similar option with future lineups that support AV2, especially given how popular video creation and streaming are now.
Well yes? The platforms only accept certain resolution/bitrates and also most of America isnt running 1gig up. They're running 5-30 mbps up. So yeah they need to encode it.
If you don't encode locally as the video is created, you either need to store RAW frames which takes enormous amount of storage, or you use a different format and suffer quality loss by transcending.
Sorry if this sounds naive, but does it make sense to write a codec library in C/ASM considering how well Rust is progressing, especially when, as the author puts it, AV2 decoding is roughly five times more complex than AV1 decoding?
The safety can be worth it in certain cases. Like when handling untrusted input. And it's not just Rust: look at WUFFS for example. WUFFS can actually rival handwritten implementations in certain cases.
Are video codecs in the present day able to be sandboxed? In my fantasies at least I’d like the worst a malicious video file can do is cause garbage output or cause the codec to crash.
Forgive the ignorance, I have worked entirely in the abstracted layers of the stack, and mostly web.
That isn’t particularly helpful to someone asking a question in good faith. What others are using doesn’t clarify why they are using it. Plus, FFmpeg is itself a decade older than Rust. The OP is asking about starting a new project today.
Isn’t that just the same as answering “Google it”, then? We’re on a discussion forum, where matter experts visit, talking about a specific topic. If one can’t ask their questions in this highly relevant situation, where can they? The point of HN is supposed to be gratifying curiosity.
The algorithms deployed in these kind of codecs take into account not only human vision and mathematical laws of information, but also nitty-gritty details of how computers work, which are optimally exploited by directly having humans write detailed assembly rather than a compiler make a best guess and effort.
Encoder and decoder writers frequently need extremely fine grain control over SIMD instructions in order to get good performance.
The way they weave these instructions can be very hard to express with a high level language.
Further, there's a ton of work with arrays and importantly parts of arrays. They can, for example, need to extract every other element up to 1/2 the array. Unfortunately, rust has runtime array bounds checks which make writing that sort of code slower. The compiler can elade those checks, but usually only in simple cases.
The authors would be writing a bunch of unsafe rust to get the performance they want and rust makes that more painful on purpose.
I like rust, but C/ASM really is the right choice here. This is one of the few cases where rust's safety is a major detriment.
The ffmpeg devs have said many times in public that they routinely get speedups of 10x or more over C code. I'm not a reputable source on this myself but I highly recommend looking into their channels, mails, or posts.
I don't know why you've been down-voted. It definitely isn't an optimal decision. A video codec isn't all assembly. There's plenty of plain unsafe C code. E.g. this is the first random file I clicked. It has a ton of raw C pointer stuff just begging to be exploited.
> This is enough of a difference to be a problem for potential adopters, and, frankly, it just bothers us.
But in my opinion nobody actually cares about 5% in absolute terms. It's likely just Rust naysayers using that as an excuse.
I think the likely reason for dav2d using C is that they can reuse lots of code and infrastructure from dav1d. But I agree it would be much better if they worked on Rav2d instead (these names!). You can hardly complain about a 5% overhead if you're opting in to 5x more decoding complexity.
Video resolution: 128x72, hahah. Late 90s RealPlayer postage stamp video is back! To its credit, that whole movie is probably smaller than RealPlayer itself was.
There's a 64MB game boy advance cartridge with shrek on it [1]. Looks pretty horrible [2]. But the GBA only has 16KB fast / 256KB slow RAM, and a 16MHz CPU.
When AV1 was first announced, I got the impression the name was chosen partly as a pun/reference/homage to AVI, the classic but outdated format with used to be popular. Then when I saw Dav1d, OK, good way to continue the pun.
But now with AV2 and Dav2d, that completely breaks. Are we eventually going to get AV3/Dav3d and AV4/Dav4d, which will read like Ave/Daved and Ava/Davad? Seems a bit awkward. Was the idea from the start to have the 1 be the version number, and have it specifically be part of the name?
I think it's a reasonable decision. The only people who will interact with dav2d by name are codec nerds, and a simple increment makes the lineage more obvious to that audience.
I'm pretty sure it is a homage. As for dav1d it's not a reference decoder (although partially funded by AOM iirc) so they might not know that the next iteration will simply be AV2, we have h264, h265, h266 naming though
Tangent but I cannot wait for h269 (or h267 for the younger gen)
I’m fascinated by the flurry of downvotes to a simple commentary and question, especially when the replies are normal. If you’re one of the downvotes, please do share what you found offensive about my comment, I am genuinely interested in what you perceived as problematic.
> Make it fast on older desktop, by writing asm for SSSE3+ chips
I guess 5 years ago (around the time when Intel stopped making SSE-only chips) is technically "older", but I wouldn't prioritize avx2 when devices intended for consuming media definitely experience much less pressure to upgrade than workstations…
Almost every Intel CPU released since 2013 has AVX2 support. Some Atom SKUs were longer holdouts, but the fraction of x86 CPUs shipped in the last decade that have AVX2 support is very high.
Seems like the blog succumbed to the HN hug of death (`Actioning this file would cause "jbkempf.com//blog/2026/dav2d/" to exceed the per-day file actions limit of 160000 actions, try again later`), is there a copy available somewhere?
```
Too Many Requests
The page you have tried to access is not available because the owner of the file you are trying to access has exceeded our short term bandwidth limits. Please try again shortly.
Details:
Actioning this file would cause "jbkempf.com//blog/2026/dav2d/" to exceed the per-day file actions limit of 160000 actions, try again later
```
A codec spec isn't done until there is at least one decoder developed in the field. So reference + 1. The field implementations often become the de facto spec.
Reading the MPEG1 specs back in the 90s as a child opened my eyes to how to define complex systems. For a media coding standard, they spent most of their time saying how to interpret encoded bytes, which I realized is genius. Be descriptive about decoding and you don't have to be prescriptive about encoding. Encoding is where you can apply all the creativity, but you need to provide a way to have a shared understanding of the encoded bytes.
Eldodi | 4 hours ago
AV1 was designed as royalty-free, but Sisvel’s pool and the recent Dolby/Snap proved the contrary.
https://accessadvance.com/2026/03/24/access-advance-licensor...
UnlockedSecrets | 4 hours ago
AndrewDucker | 4 hours ago
They're claiming that there are patents, but that doesn't mean there are.
Eldodi | 4 hours ago
Consumer Display Device: EUR 0.32
Consumer Non-Display Device: EUR 0.11
(source here: https://www.sisvel.com/licensing-programmes/audio-and-video-...)
croes | 4 hours ago
I can claim the same and offer licenses per device.
UnlockedSecrets | 4 hours ago
silotis | 3 hours ago
zamadatix | 3 hours ago
Dolby is somewhat more interesting in that rather than scare tactics, media hype, and attempting to form a pool about it they are actually taking a patent assertion claim to court.
justinclift | 3 hours ago
So they seem to be attempting to pull a fast one and use unproven claims to try and convert their competitor into a replacement revenue source.
It'll probably be a case of whoever has the best lawyers + contacts + persistence wins.
But it'll be interesting if discovery shows evidence they know they don't have a case and are trying it anyway. "Piercing the corporate veil" can theoretically be a consequence of that AFAIK.
croes | 4 hours ago
Arodex | 4 hours ago
Either go back read the answers there first, or I will assume you are part of a FUD campaign (yes, I know HN guidelines, but again every single AV2 news in the last week has seen the same rhetorical "questions" as top "comments").
Slurpee99 | 4 hours ago
croes | 4 hours ago
jbk | 4 hours ago
AV2 saves 25% bandwidth at the cost of 5x more decoding complexity.
0x1ceb00da | 3 hours ago
simjnd | 3 hours ago
BillStrong | 2 hours ago
Caspy7 | an hour ago
WD-42 | an hour ago
IshKebab | 38 minutes ago
whynotmaybe | 4 hours ago
jordand | 4 hours ago
AV1 software decoding is already very intensive so AV2 decoding benchmarks are the next thing that would be really interesting (or mortifying) to see.
jbk | 4 hours ago
Yes, this is going to be fun to watch.
mrbluecoat | 3 hours ago
breve | 3 hours ago
Netflix uses AV1: https://netflixtechblog.com/av1-now-powering-30-of-netflix-s...
YouTube uses AV1. It's tough to be more mainstream than that.
Right click on a YouTube video and select Stats for Nerds. If your system is capable of it, chances are it will be playing back in AV1.
Most of the YouTube videos I watch these days are AV1 encodes. Sometimes it's in VP9 and occasionally it's H.264.
sylware | 3 hours ago
What's missing mostly: live streams which are h264.
Currently, and I say currently, dav1d is so fast, no worries on that side.
weiliddat | 3 hours ago
Even on 1080p videos running on AV1 on 1x, the TV system bogs down and any kind of interaction has a variable 1-3s lag. On some TVs if you do 1.25x the TV automatically "downgrades" the resolution to 480p to avoid dropping frames.
I wish there was an option to still use VP9 / H.264 on those systems (even limited to 1080p).
TingPing | 2 hours ago
Dylan16807 | 18 minutes ago
jordand | 3 hours ago
ZeroGravitas | an hour ago
kmfrk | 2 hours ago
Hope we get a similar option with future lineups that support AV2, especially given how popular video creation and streaming are now.
thrownthatway | an hour ago
The point of encoding is to reduce downstream bandwidth for the viewer, and upstream bandwidth for the distribution network.
The content creator only needs to upload it once.
halJordan | 52 minutes ago
phkahler | 45 minutes ago
IshKebab | 41 minutes ago
poly2it | 4 hours ago
jbk | 4 hours ago
Rust does not bring more performance. Just more safety.
LoganDark | 2 hours ago
throawayonthe | an hour ago
IshKebab | 31 minutes ago
xp84 | an hour ago
Forgive the ignorance, I have worked entirely in the abstracted layers of the stack, and mostly web.
Telaneo | 4 hours ago
latexr | 3 hours ago
Telaneo | 3 hours ago
It does if you ask them, or at least research the topic at hand.
latexr | 52 minutes ago
MattRix | 4 hours ago
Arodex | 4 hours ago
cogman10 | 3 hours ago
The way they weave these instructions can be very hard to express with a high level language.
Further, there's a ton of work with arrays and importantly parts of arrays. They can, for example, need to extract every other element up to 1/2 the array. Unfortunately, rust has runtime array bounds checks which make writing that sort of code slower. The compiler can elade those checks, but usually only in simple cases.
The authors would be writing a bunch of unsafe rust to get the performance they want and rust makes that more painful on purpose.
I like rust, but C/ASM really is the right choice here. This is one of the few cases where rust's safety is a major detriment.
muhbaasu | 3 hours ago
throawayonthe | an hour ago
it's not much slower than the original C/ASM implementation (last i checked ~5%?) but that matters here
IshKebab | 22 minutes ago
https://code.videolan.org/videolan/dav2d/-/blob/main/src/dat...
There is a project to write an AV1 decoder in Rust: Rav1d (really stretching the name here).
https://github.com/memorysafety/rav1d
They got within 5% of the performance of dav1d and held a contest to close the gap but I think I read somewhere that this wasn't achieved.
https://www.memorysafety.org/blog/rav1d-perf-bounty/
They claimed
> This is enough of a difference to be a problem for potential adopters, and, frankly, it just bothers us.
But in my opinion nobody actually cares about 5% in absolute terms. It's likely just Rust naysayers using that as an excuse.
I think the likely reason for dav2d using C is that they can reuse lots of code and infrastructure from dav1d. But I agree it would be much better if they worked on Rav2d instead (these names!). You can hardly complain about a 5% overhead if you're opting in to 5x more decoding complexity.
nmz | 21 minutes ago
If you can stand Lex Friedman for a bit, the VLC authors talk about why you use ASM for a video decoder instead of pure C or rust.
GaggiX | 4 hours ago
UnlockedSecrets | 4 hours ago
MaxikCZ | 3 hours ago
Shrek 1 at 8.34MB including audio.. insane
coldpie | 2 hours ago
GaggiX | 2 hours ago
ant6n | an hour ago
[1] https://archive.org/details/Shrek-Video-GBA [2] https://www.youtube.com/watch?v=CyOfPZQl4MI
lostmsu | 3 hours ago
husky8 | 4 hours ago
cozzyd | 2 hours ago
aetherspawn | 4 hours ago
cogman10 | 3 hours ago
It's a semi-common last name.
https://en.wikipedia.org/wiki/Wiener_filter?wprov=sfla1
anoncow | 3 hours ago
adithyassekhar | 2 hours ago
ltheanine | 45 minutes ago
fitzroymckay | 10 minutes ago
latexr | 3 hours ago
But now with AV2 and Dav2d, that completely breaks. Are we eventually going to get AV3/Dav3d and AV4/Dav4d, which will read like Ave/Daved and Ava/Davad? Seems a bit awkward. Was the idea from the start to have the 1 be the version number, and have it specifically be part of the name?
WhrRTheBaboons | 3 hours ago
jl6 | 3 hours ago
2av2furious?
Hendrikto | 3 hours ago
BillStrong | 2 hours ago
xp84 | an hour ago
Just “AV”
Next, AV Series 1 and 2 (released simultaneously)
Later, AV Edition but it costs $10,000
Arubis | 3 hours ago
p1mrx | an hour ago
xp84 | an hour ago
BetterThanSober | an hour ago
Tangent but I cannot wait for h269 (or h267 for the younger gen)
latexr | 48 minutes ago
remix2000 | 3 hours ago
I guess 5 years ago (around the time when Intel stopped making SSE-only chips) is technically "older", but I wouldn't prioritize avx2 when devices intended for consuming media definitely experience much less pressure to upgrade than workstations…
otherjason | 2 hours ago
the__alchemist | 3 hours ago
staindk | 3 hours ago
tosti | 2 hours ago
JoshTriplett | 2 hours ago
*Da5id
kingstnap | 2 hours ago
Like we had weird examples like C compilers and Bun. This is a much more interesting example because its highly nontrivial.
AV1 exists, Dav1d exists. Lets see AI take the AV2 spec and Dav1d code and try to make a working high performance AV2 decoder.
plopilop | 2 hours ago
juliie | 2 hours ago
celsoazevedo | 2 hours ago
- https://web.archive.org/web/20260531130034/https://jbkempf.c...
- https://archive.md/ln5UE
kaka314 | 2 hours ago
``` Too Many Requests The page you have tried to access is not available because the owner of the file you are trying to access has exceeded our short term bandwidth limits. Please try again shortly.
Details: Actioning this file would cause "jbkempf.com//blog/2026/dav2d/" to exceed the per-day file actions limit of 160000 actions, try again later ```
hideout_berlin | 2 hours ago
BetterThanSober | an hour ago
jezzamon | 49 minutes ago
yieldcrv | an hour ago
genxy | 49 minutes ago
Reading the MPEG1 specs back in the 90s as a child opened my eyes to how to define complex systems. For a media coding standard, they spent most of their time saying how to interpret encoded bytes, which I realized is genius. Be descriptive about decoding and you don't have to be prescriptive about encoding. Encoding is where you can apply all the creativity, but you need to provide a way to have a shared understanding of the encoded bytes.